美国协调关税表（HTSUS） › 第 XV 类 贱金属及其制品
72钢铁
559 条统计税号 · 点击品目展开；最右列为普通税率。
Pig iron and spiegeleisen in pigs, blocks or other primary forms7201
Alloy pig iron; spiegeleisen7201.50
Alloy pig iron7201.50.30.00Free
Spiegeleisen7201.50.60.00Free
Ferroalloys7202
Ferromanganese7202
Containing by weight more than 2 percent of carbon7202.11
Containing by weight more than 4 percent of carbon7202.11.50.001.5%
Other7202.19
Containing by weight not more than 1 percent of carbon7202.19.10.002.3%
Ferrosilicon7202
Containing by weight more than 55 percent of silicon7202.21
Containing by weight more than 55 percent but not more than 80 percent of silicon7202.21
Containing by weight more than 3 percent of calcium7202.21.10.001.1%
Other7202.21.50.001.5%
Containing by weight more than 90 percent of silicon7202.21.90.005.8%
Other7202.29.00
Containing by weight over 2 percent of magnesium7202.29.00.10Free
Other7202.29.00.50Free
Ferrosilicon manganese7202.30.00
Containing by weight not more than 0.10 percent of carbon7202.30.00.603.9%
Other7202.30.00.903.9%
Ferrochromium7202
Containing by weight more than 4 percent of carbon7202.41.00.001.9%
Other7202.49
Containing by weight more than 3 percent of carbon7202.49.10.001.9%
Other7202.49.50
Containing by weight more than 0.5 percent of carbon7202.49.50.103.1%
Other7202.49.50.903.1%
Ferrosilicon chromium7202.50.00.0010%
Ferronickel7202.60.00.00Free
Ferromolybdenum7202.70.00.004.5%
Ferrotungsten and ferrosilicon tungsten7202.80.00.005.6%
Other7202
Ferrotitanium and ferrosilicon titanium7202.91.00.003.7%
Ferrovanadium7202.92.00.004.2%
Ferroniobium7202.93
Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon7202.93.40.005%
Other7202.93.80.005%
Other7202.99
Ferrozirconium7202.99.10.004.2%
Calcium silicon7202.99.20.005%
Other7202.99.80
Ferrophosphorus7202.99.80.205%
Other7202.99.80.405%
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms7203
Ferrous products obtained by direct reduction of iron ore7203.10.00.00Free
Other7203.90.00.00Free
Ferrous waste and scrap; remelting scrap ingots of iron or steel7204
Waste and scrap of cast iron7204.10.00.00Free
Waste and scrap of alloy steel7204
Of stainless steel7204.21.00.00Free
Other7204.29.00.00Free
Waste and scrap of tinned iron or steel7204.30.00.00Free
Other waste and scrap7204
Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles7204.41.00
No. 1 bundles7204.41.00.20Free
No. 2 bundles7204.41.00.40Free
Borings, shovelings and turnings7204.41.00.60Free
Other7204.41.00.80Free
Other7204.49.00
Remelting scrap ingots7204.50.00.00Free
Granules and powders, of pig iron, spiegeleisen, iron or steel7205
Granules7205.10.00.00Free
Powders7205
Of alloy steel7205.21.00.00Free
Other7205.29.00.00Free
Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203)7206
Semifinished products of iron or nonalloy steel7207
Containing by weight less than 0.25 percent of carbon7207
Of rectangular (including square) cross section, the width measuring less than twice the thickness7207.11.00.00Free
Other, of rectangular (other than square) cross section7207.12.00
Having a width measuring less than four times the thickness7207.12.00.10Free
Having a width measuring at least four times the thickness7207.12.00.50Free
Other7207.19.00
Of circular cross section7207.19.00.30Free
Other7207.19.00.90Free
Containing by weight 0.25 percent or more of carbon7207.20.00
Of rectangular (including square) cross section7207.20.00
Having a width measuring less than four times the thickness7207.20.00.25Free
Having a width measuring at least four times the thickness7207.20.00.45Free
Of circular cross section7207.20.00.75Free
Other7207.20.00.90Free
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated7208
In coils, not further worked than hot-rolled, with patterns in relief7208.10
Pickled7208.10.15.00Free
Other7208.10
Of a thickness of 4.75 mm or more7208.10.30.00Free
Of a thickness of less than 4.75 mm7208.10.60.00Free
Other, in coils, not further worked than hot-rolled, pickled7208
Of a thickness of 4.75 mm or more7208.25
Of high-strength steel7208.25.30.00Free
Other7208.25.60.00Free
Of a thickness of 3 mm or more but less than 4.75 mm7208.26.00
High-strength steel7208.26.00.30Free
Other7208.26.00.60Free
Other, in coils, not further worked than hot-rolled7208
Of a thickness exceeding 10 mm7208.36.00
High-strength steel7208.36.00.30Free
Other7208.36.00.60Free
Of a thickness of 4.75 mm or more but not exceeding 10 mm7208.37.00
High-strength steel7208.37.00.30Free
Other7208.37.00.60Free
Of a thickness of 3 mm or more but less than 4.75 mm7208.38.00
High-strength steel7208.38.00.15Free
Other7208.38.00
With untrimmed edges7208.38.00.30Free
Other7208.38.00.90Free
Of a thickness of less than 3 mm7208.39.00
High-strength steel7208.39.00
Other7208.39.00.25Free
Other7208.39.00
With untrimmed edges7208.39.00.30Free
Other7208.39.00.90Free
Not in coils, not further worked than hot-rolled, with patterns in relief7208.40
Of a thickness of 4.75 mm or more7208.40.30
Of a thickness exceeding 10 mm7208.40.30.30Free
Other7208.40.30.60Free
Of a thickness of less than 4.75 mm7208.40.60
Of a thickness less than 3 mm7208.40.60.30Free
Other7208.40.60.60Free
Other, not in coils, not further worked than hot-rolled7208
Of a thickness exceeding 10 mm7208.51.00
Universal mill plate7208.51.00.30Free
Other7208.51.00
Of high-strength steel7208.51.00.45Free
Other7208.51.00.60Free
Of a thickness of 4.75 mm or more but not exceeding 10 mm7208.52.00.00Free
Of a thickness of 3 mm or more but less than 4.75 mm7208.53.00.00Free
Of a thickness of less than 3 mm7208.54.00.00Free
Other7208.90.00.00Free
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated7209
In coils, not further worked than cold-rolled (cold-reduced)7209
Of a thickness of 3 mm or more7209.15.00.00Free
Of a thickness exceeding 1 mm but less than 3 mm7209.16.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm7209.17.00
Of a thickness of less than 0.5 mm7209.18
Not in coils, not further worked than cold-rolled (cold-reduced)7209
Of a thickness of 3 mm or more7209.25.00.00Free
Of a thickness exceeding 1 mm but less than 3 mm7209.26.00.00Free
Of a thickness of 0.5 mm or more but not exceeding 1 mm7209.27.00.00Free
Of a thickness of less than 0.5 mm7209.28.00.00Free
Other7209.90.00.00Free
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated7210
Plated or coated with tin7210
Of a thickness of 0.5 mm or more7210.11.00.00Free
Of a thickness of less than 0.5 mm7210.12.00.00Free
Plated or coated with lead, including terne-plate7210.20.00.00Free
Electrolytically plated or coated with zinc7210.30.00
Of high-strength steel7210.30.00.30Free
Other7210.30.00.60Free
Otherwise plated or coated with zinc7210
Corrugated7210.41.00.00Free
Other7210.49.00
Of high-strength steel7210.49.00
Other7210.49.00.45Free
Other7210.49.00
Of a thickness of 0.4 mm or more7210.49.00.91Free
Other7210.49.00.95Free
Plated or coated with chromium oxides or with chromium and chromium oxides7210.50.00
Of a width less than 1050 mm7210.50.00.20Free
Other7210.50.00.90Free
Plated or coated with aluminum7210
Plated or coated with aluminum-zinc alloys7210.61.00.00Free
Other7210.69.00.00Free
Painted, varnished or coated with plastics7210.70
Not coated or plated with metal and not clad7210.70.30.00Free
Other7210.70.60
Zinc coated or plated7210.70.60
Electrolytically coated or plated7210.70.60.30Free
Other7210.70.60.60Free
Other7210.70.60.90Free
Other7210.90
Clad7210.90.10.00Free
Other7210.90
Electrolytically coated or plated with base metal7210.90.60.00Free
Other7210.90.90.00Free
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated7211
Not further worked than hot-rolled7211
Universal mill plate7211.13.00.00Free
Other, of a thickness of 4.75 mm or more7211.14.00
Of high-strength steel7211.14.00.30Free
Other7211.14.00
Not in coils7211.14.00.45Free
Other7211.14.00.90Free
Other7211.19
Of a width of less than 300 mm7211.19
Of high-strength steel7211.19.15.00Free
Other7211.19
Of a thickness exceeding 1.25 mm7211.19.20.00Free
Other7211.19.30.00Free
Other7211.19
Of high-strength steel7211.19.45.00Free
Other7211.19
Pickled7211.19.60.00Free
Other7211.19.75
In coils7211.19.75
With untrimmed edges7211.19.75.30Free
Other7211.19.75.60Free
Other7211.19.75.90Free
Not further worked than cold-rolled (cold-reduced)7211
Containing by weight less than 0.25 percent of carbon7211.23
Of a width of less than 300 mm7211.23
Of a thickness exceeding 1.25 mm7211.23
Of high-strength steel7211.23.15.00Free
Other7211.23.20.00Free
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm7211.23.30.00Free
Of a thickness not exceeding 0.25 mm7211.23.45.00Free
Other7211.23.60
Of a thickness exceeding 1.25 mm7211.23.60.30Free
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm7211.23.60.60Free
Of a thickness not exceeding 0.25 mm:7211.23.60.90Free
Other7211.29
Of a width of less than 300 mm7211.29
Of a thickness exceeding 0.25 mm7211.29.20
Of a width less than 51 mm, in coils7211.29.20.30Free
Other7211.29.20.90Free
Other7211.29.45.00Free
Other7211.29.60
Of a thickness exceeding 1.25 mm7211.29.60.30Free
Other7211.29.60.80Free
Other7211.90.00.00Free
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated7212
Plated or coated with tin7212.10.00.00Free
Electrolytically plated or coated with zinc7212.20.00.00Free
Otherwise plated or coated with zinc7212.30
Of a width of less than 300 mm7212.30
Of a thickness exceeding 0.25 mm or more7212.30.10
Of a width less than 51 mm, in coils7212.30.10.30Free
Other7212.30.10.90Free
Other7212.30.30.00Free
Other7212.30.50.00Free
Painted, varnished or coated with plastics7212.40
Of a width of less than 300 mm7212.40.10.00Free
Other7212.40.50.00Free
Otherwise plated or coated7212.50.00.00Free
Clad7212.60.00.00Free
Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel7213
Concrete reinforcing bars and rods7213.10.00.00Free
Other, of free-cutting steel7213.20.00
Containing by weight 0.1 percent or more of lead7213.20.00.10Free
Other7213.20.00.80Free
Other7213
Of circular cross section measuring less than 14 mm in diameter7213.91
Not tempered, not treated and not partly manufactured7213.91.30
Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapter7213.91.30.11Free
Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter7213.91.30.15Free
Of welding quality wire rods of a kind described in statistical note 7 to this chapter7213.91.30.20Free
Other7213.91.30.93Free
Other7213.91
Containing by weight 0.6 percent or more of carbon7213.91.45.00Free
Other7213.91.60.00Free
Other7213.99.00
Of circular cross section7213.99.00
With a diameter of 14 mm or more but less than 19 mm7213.99.00.30Free
With a diameter of 19 mm or more7213.99.00.60Free
Other7213.99.00.90Free
Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling7214
Forged7214.10.00.00Free
Concrete reinforcing bars and rods7214.20.00.00Free
Other, of free-cutting steel7214.30.00
Containing by weight 0.1 percent or more of lead7214.30.00.10Free
Other7214.30.00.80Free
Other7214
Of rectangular (other than square) cross-section7214.91.00
Containing by weight less than 0.25 percent of carbon7214.91.00
With a maximum cross section less than 152 mm7214.91.00.16Free
With a maximum cross section of 152 mm or more7214.91.00.20Free
Containing by weight 0.6 percent or more of carbon7214.91.00.90Free
Other7214.99.00
Rounds7214.99.00
Containing by weight less than 0.25 percent of carbon7214.99.00
With a diameter less than 76 mm7214.99.00.16Free
With a diameter of 76 mm or more but not exceeding 152 mm7214.99.00.21Free
With a diameter exceeding 152 mm7214.99.00.26Free
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon7214.99.00
With a diameter less than 76 mm7214.99.00.31Free
With a diameter of 76 mm or more but not exceeding 152 mm7214.99.00.36Free
With a diameter exceeding 152 mm7214.99.00.40Free
Containing by weight 0.6 percent or more of carbon7214.99.00.45Free
Other7214.99.00
Containing by weight less than 0.25 percent of carbon7214.99.00.60Free
Containing by weight 0.6 percent or more of carbon7214.99.00.90Free
Other bars and rods of iron or nonalloy steel7215
Of free-cutting steel, not further worked than cold-formed or cold-finished7215.10.00
Containing by weight 0.1 percent or more of lead7215.10.00.10Free
Other7215.10.00.80Free
Other, not further worked than cold-formed or cold-finished7215.50.00
Containing by weight less than 0.25 percent of carbon7215.50.00
With a diameter or cross section measuring less than 76 mm7215.50.00.16Free
With a diameter or cross section exceeding 228 mm7215.50.00.20Free
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon7215.50.00
With a diameter or cross section measuring less than 76 mm7215.50.00.61Free
With a diameter or cross section exceeding 228 mm7215.50.00.65Free
Containing by weight 0.6 percent or more of carbon7215.50.00.90Free
Other7215.90
Plated or coated with metal7215.90
Not cold-formed7215.90.10.00Free
Cold-formed7215.90.30.00Free
Other7215.90.50.00Free
Angles, shapes and sections of iron or nonalloy steel7216
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm7216.10.00
U sections7216.10.00.10Free
Other7216.10.00.50Free
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm7216
L sections7216.21.00.00Free
T sections7216.22.00.00Free
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more7216
U sections7216.31.00.00Free
I sections (standard beams)7216.32.00.00Free
H sections7216.33.00
Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mm7216.33.00.30Free
Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mm7216.33.00.60Free
Other7216.33.00.90Free
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more7216.40.00
L sections7216.40.00.10Free
Other7216.40.00.50Free
Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded7216.50.00.00Free
Angles, shapes and sections, not further worked than cold-formed or cold-finished7216
Obtained from flat-rolled products7216.61.00.00Free
Other7216.69.00.00Free
Other7216
Cold-formed or cold-finished from flat-rolled products7216.91.00
Drilled, notched, punched or cambered7216.91.00.10Free
Other7216.91.00.90Free
Other7216.99.00
Drilled, notched, punched or cambered7216.99.00.10Free
Other7216.99.00.90Free
Wire of iron or nonalloy steel7217
Not plated or coated, whether or not polished7217.10
Containing by weight less than 0.25 percent of carbon7217.10
Flat wire7217.10
Of a thickness not exceeding 0.25 mm7217.10.10.00Free
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm7217.10.20.00Free
Of a thickness exceeding 1.25 mm7217.10.30.00Free
Round wire7217.10
With a diameter of less than 1.5 mm7217.10.40
Heat treated7217.10.40
In coils weighing not more than 2 kilograms7217.10.40.40Free
Other7217.10.40.45Free
Other7217.10.40.90Free
With a diameter of 1.5 mm or more7217.10.50
Heat treated7217.10.50.30Free
Other7217.10.50.90Free
Other wire7217.10.60.00Free
Other7217.10
Flat wire7217.10.70.00Free
Round wire7217.10.80
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon7217.10.80
Heat treated7217.10.80.10Free
Other7217.10.80.20Free
Containing by weight 0.6 percent or more of carbon7217.10.80
Heat treated7217.10.80
With a diameter of less than 1.0 m m7217.10.80.25Free
With a diameter of 1.0 mm or more but less than 1.5 mm7217.10.80.30Free
With a diameter of 1.5 mm or more7217.10.80.45Free
Other7217.10.80
With a diameter of less than 1.0 m m7217.10.80.60Free
With a diameter of 1.0 mm or more but less than 1.5 mm7217.10.80.75Free
With a diameter of 1.5 mm or more7217.10.80.90Free
Other wire7217.10.90.00Free
Plated or coated with zinc7217.20
Flat wire7217.20.15.00Free
Round wire7217.20
With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon7217.20.30.00Free
Other7217.20.45
With a diameter of less than 1.0 mm7217.20.45
Containing by weight less than 0.25 percent of carbon7217.20.45.10Free
Containing by weight 0.6 percent or more of carbon7217.20.45.30Free
With a diameter of 1.0 mm or more but less than 1.5 mm7217.20.45
Containing by weight less than 0.25 percent of carbon7217.20.45.40Free
Containing by weight 0.6 percent or more of carbon7217.20.45.60Free
With a diameter of 1.5 mm or more7217.20.45
Containing by weight 0.6 percent or more of carbon7217.20.45.80Free
Other7217.20
Containing by weight less than 0.25 percent of carbon7217.20.60.00Free
Other7217.20.75.00Free
Plated or coated with other base metals7217.30
Flat wire7217.30.15
Containing by weight 0.6 percent or more of carbon7217.30.15.30Free
Other7217.30.15.60Free
Round wire7217.30
With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon7217.30.30.00Free
Other7217.30.45
Containing by weight less than 0.20 percent of carbon, and suitable for electric arc welding7217.30.45.04Free
Other7217.30.45
With a diameter of less than 1.0 mm7217.30.45
Containing by weight less than 0.25 percent of carbon7217.30.45.11Free
Containing by weight 0.6 percent or more of carbon7217.30.45.30Free
With a diameter of 1.0 mm or more but less than 1.5 mm7217.30.45
Containing by weight less than 0.25 percent of carbon7217.30.45.41Free
Containing by weight 0.6 percent or more of carbon7217.30.45.60Free
With a diameter of 1.5 mm or more7217.30.45.90Free
Other7217.30
Containing by weight less than 0.25 percent of carbon7217.30.60.00Free
Other7217.30.75.00Free
Other7217.90
Coated with plastics7217.90.10.00Free
Other7217.90.50
Containing by weight less than 0.25 percent of carbon7217.90.50.30Free
Containing by weight 0.6 percent or more of carbon7217.90.50.90Free
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel7218
Ingots and other primary forms7218.10.00.00Free
Other7218
Of rectangular (other than square) cross-section7218.91.00
Having a width less than four times the thickness7218.91.00
Having a cross-sectional area of less than 232 cm27218.91.00.15Free
Having a cross-sectional area of 232 cm2 or more7218.91.00.30Free
Having a width at least four times the thickness7218.91.00.60Free
Other7218.99.00
Of square cross section7218.99.00
Having a cross-sectional area of less than 232 cm27218.99.00.15Free
Having a cross-sectional area of 232 cm2 or more7218.99.00.30Free
Of circular cross section7218.99.00
Having a cross-sectional area of less than 232 cm27218.99.00.45Free
Having a cross-sectional area of 232 cm2 or more7218.99.00.60Free
Other7218.99.00.90Free
Flat-rolled products of stainless steel, of a width of 600 mm or more7219
Not further worked than hot-rolled, in coils7219
Of a thickness exceeding 10 mm7219.11.00
Of a width not exceeding 1575 mm7219.11.00.30Free
Of a width exceeding 1575 mm7219.11.00.60Free
Of a thickness of 4.75 mm or more but not exceeding 10 mm7219.12.00
Not annealed or not pickled7219.12.00.02Free
Other7219.12.00
Of high-nickel alloy steel7219.12.00.06Free
Other7219.12.00
Of a width of 1370 mm or more7219.12.00
Of a thickness exceeding 6.8 mm7219.12.00
Of a width not exceeding 1575 mm7219.12.00.21Free
Of a width exceeding 1575 mm7219.12.00.26Free
Other7219.12.00
Of a width not exceeding 1575 mm7219.12.00.51Free
Of a width exceeding 1575 mm7219.12.00.56Free
Of a thickness of 3 mm or more but less than 4.75 mm7219.13.00
Not annealed or not pickled7219.13.00.02Free
Other7219.13.00
Of a width of 1370 mm or more7219.13.00.31Free
Of a thickness of less than 3 mm7219.14.00
Of a width of 1370 mm or more7219.14.00.30Free
Other7219.14.00
Of high-nickel alloy steel7219.14.00.65Free
Other7219.14.00.90Free
Not further worked than hot-rolled, not in coils7219
Of a thickness exceeding 10 mm7219.21.00
Of high-nickel alloy steel7219.21.00.05Free
Other7219.21.00
Of a width not exceeding 1575 mm7219.21.00.20Free
Of a width exceeding 1575 mm but not exceeding 1880 mm7219.21.00.40Free
Of a width exceeding 1880 mm7219.21.00.60Free
Of a thickness of 4.75 mm or more but not exceeding 10 mm7219.22.00
Of high-nickel alloy steel7219.22.00.05Free
Other7219.22.00
Containing more than 0.5 percent by weight of nickel7219.22.00
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum7219.22.00
Of a width not exceeding 1575 mm7219.22.00.15Free
Of a width exceeding 1575 mm but not exceeding 1880 mm7219.22.00.20Free
Of a width exceeding 1880 mm7219.22.00.25Free
Other7219.22.00
Of a width not exceeding 1575 mm7219.22.00.35Free
Of a width exceeding 1575 mm but not exceeding 1880 mm7219.22.00.40Free
Of a width exceeding 1880 mm7219.22.00.45Free
Other7219.22.00
Of a width not exceeding 1575 mm7219.22.00.70Free
Of a width exceeding 1575 mm but not exceeding 1880 mm7219.22.00.75Free
Of a width exceeding 1880 mm7219.22.00.80Free
Of a thickness of 3 mm or more but less than 4.75 mm7219.23.00
Of a width of 1370 mm or more7219.23.00.30Free
Other7219.23.00.60Free
Of a thickness of less than 3 mm7219.24.00
Of a width of 1370 mm or more7219.24.00.30Free
Other7219.24.00.60Free
Not further worked than cold-rolled (cold-reduced)7219
Of a thickness of 4.75 mm or more7219.31.00
In coils7219.31.00.10Free
Not in coils7219.31.00.50Free
Of a thickness of 3 mm or more but less than 4.75 mm7219.32.00
In coils7219.32.00
Of a width of 1370 mm or more7219.32.00
Of high-nickel alloy steel7219.32.00.05Free
Other7219.32.00
Containing more than 0.5 percent by weight of nickel7219.32.00.20Free
Other7219.32.00.25Free
Other7219.32.00
Of high-nickel alloy steel7219.32.00.35Free
Other7219.32.00
Containing more than 0.5 percent by weight of nickel7219.32.00
Other7219.32.00.38Free
Other7219.32.00
Containing less than 15 percent by weight of chromium7219.32.00.42Free
Other7219.32.00.44Free
Not in coils7219.32.00
Of a width of 1370 mm or more7219.32.00.45Free
Other7219.32.00.60Free
Of a thickness exceeding 1 mm but less than 3 mm7219.33.00
In coils7219.33.00
Of a width of 1370 mm or more7219.33.00
Of high-nickel alloy steel7219.33.00.05Free
Other7219.33.00
Containing more than 0.5 percent by weight of nickel7219.33.00.20Free
Other7219.33.00.25Free
Other7219.33.00
Of high-nickel alloy steel7219.33.00.35Free
Other7219.33.00
Containing more than 0.5 percent by weight of nickel7219.33.00
Other7219.33.00.38Free
Other7219.33.00
Containing less than 15 percent by weight of chromium7219.33.00.42Free
Other7219.33.00.44Free
Not in coils7219.33.00
Of a width of 1370 mm or more7219.33.00.45Free
Other7219.33.00
Other7219.33.00.80Free
Of a thickness of 0.5 mm or more but not exceeding 1 mm7219.34.00
In coils7219.34.00
Of high-nickel alloy steel7219.34.00.05Free
Other7219.34.00
Containing more than 0.5 percent by weight of nickel7219.34.00
Other7219.34.00.25Free
Other7219.34.00
Containing less than 15 percent by weight of chromium7219.34.00.30Free
Other7219.34.00.35Free
Not in coils7219.34.00.50Free
Of a thickness of less than 0.5 mm7219.35.00
In coils7219.35.00
Containing more than 0.5 percent but less than 24 percent by weight of nickel7219.35.00
Other7219.35.00.15Free
Other7219.35.00
Containing less than 15 percent by weight of chromium7219.35.00.30Free
Other7219.35.00.35Free
Not in coils7219.35.00.50Free
Other7219.90.00
Of high-nickel alloy steel7219.90.00.10Free
Other7219.90.00
Containing more than 0.5 percent by weight of nickel7219.90.00
Other7219.90.00.25Free
Other7219.90.00
Containing less than 15 percent by weight of chromium7219.90.00.60Free
Other7219.90.00.80Free
Flat-rolled products of stainless steel, of a width of less than 600 mm7220
Not further worked than hot-rolled7220
Of a thickness of 4.75 mm or more7220.11.00.00Free
Of a thickness of less than 4.75 mm7220.12
Of a width of 300 mm or more7220.12.10.00Free
Of a width of less than 300 mm7220.12.50.00Free
Not further worked than cold-rolled (cold-reduced)7220.20
Of a width of 300 mm or more7220.20.10
Containing more than 0.5 percent but less than 24 percent by weight of nickel7220.20.10
Other7220.20.10.15Free
Other7220.20.10
Containing less than 15 percent by weight of chromium7220.20.10.60Free
Other7220.20.10.80Free
Of a width of less than 300 mm7220.20
Of a thickness exceeding 1.25 mm7220.20.60
Of high-nickel alloy steel7220.20.60.05Free
Other7220.20.60
Containing more than 0.5 percent by weight of nickel7220.20.60
Other7220.20.60.15Free
Other7220.20.60
Containing less than 15 percent by weight of chromium7220.20.60.60Free
Other7220.20.60.80Free
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm7220.20.70
Of high-nickel alloy steel7220.20.70.05Free
Other7220.20.70
Containing more than 0.5 percent by weight of nickel7220.20.70
Other7220.20.70.15Free
Other7220.20.70
Containing less than 15 percent by weight of chromium7220.20.70.60Free
Other7220.20.70.80Free
Of a thickness not exceeding 0.25 mm7220.20
Razor blade steel7220.20.80.00Free
Other7220.20.90
Other7220.20.90.60Free
Other7220.90.00
Containing more than 0.5 percent but less than 24 percent by weight of nickel7220.90.00
Other7220.90.00.15Free
Other7220.90.00
Containing less than 15 percent by weight of chromium7220.90.00.60Free
Other7220.90.00.80Free
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel7221.00.00
Of high-nickel alloy steel7221.00.00.05Free
Other7221.00.00
Of circular cross section7221.00.00
With a diameter of less than 14 mm7221.00.00
Containing less than 8 percent by weight of nickel7221.00.00.17Free
With a diameter of 14 mm or more but less than 19 mm7221.00.00.30Free
With a diameter of 19 mm or more7221.00.00.45Free
Other7221.00.00.75Free
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel7222
Bars and rods, not further worked than hot-rolled, hot-drawn or extruded7222
Of circular cross-section7222.11.00
Electroslag or vacuum arc remelted7222.11.00.01Free
Of high-nickel alloy steel7222.11.00.06Free
Other7222.11.00
With a maximum cross-sectional dimension of less than 152.4 mm7222.11.00
Containing less than 8 percent by weight of nickel7222.11.00.57Free
With a maximum cross-sectional dimension of 152.4 mm or more7222.11.00
Containing less than 8 percent by weight of nickel7222.11.00.82Free
Other7222.19.00
Electroslag or vacuum arc remelted7222.19.00.01Free
Other7222.19.00
Of high-nickel alloy steel7222.19.00.06Free
Other7222.19.00
Containing less than 8 percent by weight of nickel7222.19.00.52Free
Bars and rods, not further worked than cold-formed or cold-finished7222.20.00
Electroslag or vacuum arc remelted7222.20.00.01Free
Of high-nickel alloy steel7222.20.00.06Free
Other7222.20.00
Of a circular cross-section7222.20.00
With a maximum circular cross-sectional dimension of less than 18 mm7222.20.00
Containing less than 8 percent by weight of nickel7222.20.00.41Free
With a maximum circular cross-sectional dimension of 18 mm or more and less than 152.4 mm7222.20.00
Containing less than 8 percent by weight of nickel7222.20.00.62Free
With a maximum circular cross-sectional dimension of 152.4 mm or more7222.20.00
Containing less than 8 percent by weight of nickel7222.20.00.67Free
Other7222.20.00
Containing less than 8 percent by weight of nickel7222.20.00.71Free
Other bars and rods7222.30.00
Electroslag or vacuum arc remelted7222.30.00.01Free
Of high-nickel alloy steel7222.30.00.12Free
Other7222.30.00
With a maximum cross-sectional dimension of less than 152.4 mm7222.30.00
Containing less than 8 percent by weight of nickel7222.30.00.22Free
With a maximum cross-sectional dimension of 152.4 mm or more7222.30.00
Containing less than 8 percent by weight of nickel7222.30.00.82Free
Angles, shapes and sections7222.40
Hot-rolled, not drilled, not punched and not otherwise advanced7222.40.30
Other7222.40.60.00Free
Wire of stainless steel7223.00
Round wire7223.00.10
Other7223.00.10
With a diameter of less than 0.25 mm7223.00.10.16Free
With a diameter of 0.25 mm or more but less than 0.76 mm7223.00.10.31Free
With a diameter of 0.76 mm or more but less than 1.52 mm7223.00.10.46Free
With a diameter of 1.52 mm or more but less than 5.1 mm7223.00.10.61Free
With a diameter of 5.1 mm or more7223.00.10.76Free
Flat wire7223.00.50.00Free
Other7223.00.90.00Free
Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel7224
Ingots and other primary forms7224.10.00
Of high-nickel alloy steel7224.10.00.05Free
Other7224.10.00
Of tool steel7224.10.00.45Free
Other7224.10.00.75Free
Other7224.90.00
Of high-nickel alloy steel7224.90.00.05Free
Other7224.90.00
Of tool steel7224.90.00
Of rectangular (including square) cross section7224.90.00
Having a width less than four times the thickness7224.90.00.15Free
Having a width at least four times the thickness7224.90.00.25Free
Other7224.90.00.35Free
Other7224.90.00
Of rectangular (including square) cross section7224.90.00
Having a width less than four times the thickness7224.90.00.45Free
Having a width at least four times the thickness7224.90.00.55Free
Of circular cross section7224.90.00.65Free
Other7224.90.00.75Free
Flat-rolled products of other alloy steel, of a width of 600 mm or more7225
Of silicon electrical steel7225
Grain-oriented7225.11.00.00Free
Other7225.19.00.00Free
Other, not further worked than hot-rolled, in coils7225.30
Of a thickness of 4.75 mm or more7225.30
Of tool steel7225.30.11
Of high-speed steel7225.30.11.10Free
Other7225.30.11.80Free
Other7225.30.30
Of high-nickel alloy steel7225.30.30.05Free
Other7225.30.30.50Free
Of a thickness of less than 4.75 mm7225.30
Of tool steel7225.30.51
Of high-speed steel7225.30.51.10Free
Other7225.30.51.80Free
Other7225.30.70.00Free
Other, not further worked than hot-rolled, not in coils7225.40
Of a thickness of 4.75 mm or more7225.40
Of tool steel7225.40.11
Of high-speed steel7225.40.11.10Free
Other7225.40.11.80Free
Other7225.40.30
Of high-nickel alloy steel7225.40.30.05Free
Other7225.40.30.50Free
Of a thickness of less than 4.75 mm7225.40
Of tool steel7225.40.51
Other7225.40.70.00Free
Other, not further worked than cold-rolled (cold-reduced)7225.50
Of tool steel7225.50.11
Other7225.50
Of a thickness of 4.75 mm or more7225.50.60.00Free
Of a thickness of less than 4.75 mm7225.50
Heat-resisting steel7225.50.70.00Free
Other7225.50.80
Of high-nickel alloy steel7225.50.80.10Free
Other7225.50.80.80Free
Other7225
Electrolytically plated or coated with zinc7225.91.00.00Free
Otherwise plated or coated with zinc7225.92.00.00Free
Other7225.99.00
Of high-nickel alloy steel7225.99.00.10Free
Other7225.99.00.90Free
Flat-rolled products of other alloy steel, of a width of less than 600 mm7226
Of silicon electrical steel7226
Grain-oriented7226.11
Of a width of 300 mm or more7226.11.10.00Free
Of a width of less than 300 mm7226.11.90
Of thickness not exceeding 0.25 mm7226.11.90.30Free
Other7226.11.90.60Free
Other7226.19
Of a width of 300 mm or more7226.19.10.00Free
Of a width of less than 300 mm7226.19.90.00Free
Of high-speed steel7226.20.00.00Free
Other7226
Not further worked than hot-rolled7226.91
Of tool steel (other than high-speed steel)7226.91
Of chipper knife steel7226.91.05.00Free
Other7226.91
Of a width of 300 mm or more7226.91.15
Of ball-bearing steel7226.91.15.30Free
Other7226.91.15.60Free
Of a width of less than 300 mm7226.91.25
Of ball-bearing steel7226.91.25.30Free
Other7226.91.25.60Free
Other7226.91
Of a thickness of 4.75 mm or more7226.91.50.00Free
Of a thickness of less than 4.75 mm7226.91
Of a width of 300 mm or more7226.91.70.00Free
Of a width of less than 300 mm7226.91.80.00Free
Not further worked than cold-rolled (cold-reduced)7226.92
Of tool steel (other than high-speed steel)7226.92
Of a width of 300 mm or more7226.92.10
Of ball-bearing steel7226.92.10.30Free
Other7226.92.10.60Free
Of a width of less than 300 mm7226.92.30
Of ball-bearing steel7226.92.30.30Free
Other7226.92.30.60Free
Other7226.92
Of a width of 300 mm or more7226.92.50.00Free
Of a width of less than 300 mm7226.92
Of a thickness not exceeding 0.25 mm7226.92.70
Of high-nickel alloy steel7226.92.70.05Free
Other7226.92.70.50Free
Of a thickness exceeding 0.25 mm7226.92.80
Of high-nickel alloy steel7226.92.80.05Free
Other7226.92.80.50Free
Other7226.99.01
Electrolytically plated or coated with zinc7226.99.01.10Free
Otherwise plated or coated with zinc7226.99.01.30Free
Other7226.99.01.80Free
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel7227
Of high-speed steel7227.10.00.00Free
Of silico-manganese steel7227.20.00
Of welding quality wire rods of a kind described in statistical note 7 to this chapter7227.20.00.30Free
Other7227.20.00.80Free
Other7227.90
Of tool steel (other than high-speed steel)7227.90
Not tempered, not treated, and not partly manufactured7227.90.10
Of ball-bearing steel7227.90.10.30Free
Other7227.90.10.60Free
Other7227.90.20
Of ball-bearing steel7227.90.20.30Free
Other7227.90.20.60Free
Other7227.90.60
Of high-nickel alloy steel7227.90.60.05Free
Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter7227.90.60.10Free
Of welding quality wire rods of a kind described in statistical note 7 to this chapter7227.90.60.20Free
Of a circular cross section7227.90.60
With a diameter of less than 14 mm7227.90.60.30Free
With a diameter of 14 mm or more but less than 19 mm7227.90.60.35Free
With a diameter of 19 mm or more7227.90.60.40Free
Other7227.90.60.90Free
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel7228
Bars and rods, of high-speed steel7228.10.00
Not cold-formed7228.10.00.10Free
Cold-formed7228.10.00
With a maximum cross-sectional dimension of less than 18 mm7228.10.00.30Free
With a maximum cross-sectional dimension of 18 mm or more7228.10.00.60Free
Bars and rods, of silico-manganese steel7228.20
Not cold-formed7228.20.10.00Free
Cold-formed7228.20.50.00Free
Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded7228.30
Of tool steel (other than high-speed steel)7228.30
Of ball-bearing steel7228.30.20.00Free
Of chipper knife steel, not cold-formed7228.30.40.00Free
Other7228.30.60.00Free
Other7228.30.80
Of high-nickel alloy steel7228.30.80.05Free
Concrete reinforcing bars and rods7228.30.80.10Free
Other7228.30.80
With a diameter or cross section measuring less than 76 mm7228.30.80.15Free
With a diameter or cross section exceeding 228 mm7228.30.80.70Free
Other bars and rods, not further worked than forged7228.40.00.00Free
Other bars and rods, not further worked than cold-formed or cold-finished7228.50
Of tool steel (other than high-speed steel)7228.50.10
Of ball-bearing steel7228.50.10.10Free
Other7228.50.50
Of high-nickel alloy steel7228.50.50.05Free
Other7228.50.50
With a diameter or cross section measuring less than 76 mm7228.50.50.15Free
With a diameter or cross section exceeding 228 mm7228.50.50.70Free
Other bars and rods7228.60
Of tool steel (other than high-speed steel)7228.60.10
Of ball-bearing steel7228.60.10.30Free
Other7228.60.10.60Free
Other7228.60
Not cold-formed7228.60.60.00Free
Cold-formed7228.60.80.00Free
Angles, shapes and sections7228.70
Hot-rolled, not drilled, not punched and not otherwise advanced7228.70.30
U, I, H and T sections7228.70.30.10Free
Other7228.70.60.00Free
Hollow drill bars and rods7228.80.00.00Free
Wire of other alloy steel7229
Of silico-manganese steel7229.20.00
Round, with a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon, more than 0.9 percent of manganese, and more than 0.6 percent of silicon, and suitable for electric arc welding7229.20.00
Plated or coated with copper7229.20.00.10Free
Other7229.20.00.15Free
Other7229.20.00.90Free
Other7229.90
Of high-speed steel7229.90.05.00Free
Other7229.90
Flat wire7229.90.10.00Free
Round wire7229.90.50
With a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon and more than 0.3 percent of nickel or more than 0.08 percent of molybdenum, and suitable for electric arc welding7229.90.50
Plated or coated with copper7229.90.50.06Free
Other7229.90.50.08Free
Other7229.90.50
With a diameter of less than 1.0 mm7229.90.50.16Free
With a diameter of 1.0 mm or more but less than 1.5 mm7229.90.50.31Free
With a diameter of 1.5 mm or more7229.90.50.51Free
Other wire7229.90.90.00Free